Construction Technology Tool List
The following tools are required of all Construction majors. Students must have them upon entry into their first lab in their first semester.
| 16 oz. claw hammer | 20-24 oz. framing hammer |
| Combination square or speed square | Framing square w/ rafter table |
| 48" level | 24" level |
| Torpedo level | 25' or 30' steel tape |
| measure | 50' or 100' tape measure |
| 8 or 10 pt. crosscut hand saw | Coping saw |
| Hacksaw | Utility knife w/ blades |
| Stair gages (square locks) | Chalk line w/ chalk |
| Nail sets | Screwdriver set (slotted & phillips) |
| Sliding T-bevel | 1 1/2- putty knife |
| Wood chisels | 3/8" Cordless drill |
| Construction Master V or Pro calculator | Adjustable wrench |
| Channel Locks | Tin snips |
| Side cut diagonal pliers | Long or needle nose pliers |
| Nail claw or cat's paw | Flat bar or Wonder bar |
| Crow bar | Surform pocket plane |
| 6" and 10" drywall finishing knives | Plastic or metal drywall pan |
| Drywall utility saw | Drywall hand sander |
| Volt-Ohm meter | Wire stripper |
| Wood folding Brick Spacing rule | Brick trowel |
| Tool apron | Safety glasses |
| Pencil |
*Calculator may be purchased through the VU bookstore if so desired.
Work Clothing
Students should have adequate work clothing for both interior and exterior work, including the following:
- coveralls or overalls
- boots or heavy work shoes (steel-toed recommended)
Tool Storage
All tools are to be on the job or in the lab every work day. Individual lockers are available for tool storage - there is a $5.00 rental fee for the entire school year. Locks and keys are furnished, but are to be returned at the end of the year. Lockers measure 11" wide X 19" high X 48" deep.
Recommendation
It is recommended that students purchase good quality tools. A tool box will be needed for carrying tools to and from jobs, labs, etc. VU does not insure students' tools against damage, theft, or loss of any type (please check with your homeowners' coverage).
